Articles

The wireless site survey known as an RF site survey, is the method of laying out and planning a wireless network to deliver data from various sources, to deliver the desired wireless service, optimum coverage, lowest cost, best data rates and quality of service. The survey also determines how to optimize the wireless infrastructure for optimal performance. The surveyor presents findings to the client for an interpretation and recommendation. This report discusses the objectives of a wireless site survey.

Planning includes defining the purpose of the wireless site survey to decide which areas will receive a wireless network service. The target area is the entire floor plan of the building, if one. It may include the basement, attic, or any other place with access to a wireless router or points. To determine the best coverage area, multiple measurements are taken at different times, usually at different elevations.

Once the site survey data is complete, it must be interpreted and recommendation is made regarding the best way to consolidate the access points to get optimal coverage. The surveyor first calculates the average signal strength at each access point. Then the maximum signal strength at each point is calculated. The signal strengths are typically measured in decibels.

There is another factor to consider when determining optimum coverage. Sometimes, buildings need to be moved to receive signals for certain devices. That's why a wireless site survey is used to find out where the access points should be placed. A wireless router can receive a beam of a wireless signal from a single access point to multiple access points within a building.
Wireless site surveys are typically done with radio-based survey tools. These tools require access points to be tagged with specific reference networks. This helps the survey team know which access points should be tagged with which reference networks in the building. With this information, it is easy to configure the wireless network and create an integrated building network. 

There are many other wireless site surveys available.
When conducting wireless site surveys, you will want to make sure your survey company has access to all the proper authorization data and that they use the best methodology for their clients. If you don't have a good provider with which to conduct your survey, you'll end up with an incomplete survey which won't be representative of what the true costs might actually be. Some providers will charge a lot more than others. If you use a provider with poor methodology or with people who do not have a good understanding of wireless signals, you might get inaccurate results. For this reason, you should choose your survey company wisely. Check out this blog to get enlightened on this topic: https://en.wikipedia.org/wiki/Wireless_site_survey.

The wifi site survey, sometimes known as an RF site survey or wireless site survey, is basically the method of designing and planning a wireless site, to deliver the desired wireless service, optimum bandwidth, data speeds, network coverage, roaming capability and best Quality of Service. It helps in developing a wireless broadband network that has the capacity to meet the needs of its users. Site surveys are undertaken for different reasons. These could include evaluating a proposed wireless installation, refurbishment, installation of new equipment, re-survey for site assessment etc. These surveys help in improving the quality of services provided by the wireless network providers.

Site surveys are also carried out to evaluate the wireless site transmission power. This is essential to avoid interference from other wireless sites. This is carried out by measuring the access points and their connection quality to ascertain the transmission power. Measurements are usually done on the access points, inside the building and at various locations. In addition to this, some survey companies may also carry out the measurement outside the building. This type of survey is termed as a predictive survey. Learn More here and get to hire the best survey company.

Before a wireless site survey is undertaken, it is important to prepare a floor plan. The survey company may provide you with their floor plan templates. These templates present the general layout of the property and identify the key structures. Floor plans also define the areas that are to be measured, while taking into consideration the signal coverage and transmitters placed on the property. Wireless network providers usually have a preferred wireless site survey vendor. Hence, before they start offering a service, these providers will typically ask you to visit their office and get their recommendations.

The survey also determines the main components that contribute to the overall effectiveness of the system. One of these is called the access point. The access point is the wireless site survey's best friend. It defines the main areas of coverage and its signal strength.

Another major determining factor is the signal strength of the wireless network. It helps to determine the boundaries and whether or not the signal can penetrate or travel in certain areas. The surveyor will make use of specific mathematical formulas to determine the penetration of a wireless site survey signal and its range.

Some other wireless site survey tools that are used are the heat map (a visual representation of the boundary areas), the optical zoom and the statistical data sets. A heat map allows you to see how the signal strength varies along different geographic features. The optical zoom uses a camera to show you the details of each boundary. A statistical data set provides you with the percentage of the coverage that has been acquired by the equipment. Get a general overview of the topic here: https://en.wikipedia.org/wiki/Site_survey.

The wireless indoor survey, also known as an RF site survey or wireless site survey, is the method of designing and planning a wireless site, to deliver the desired wireless service, optimum data rates, optimum network bandwidth, Best Practices, Roaming and Security, with the goal of reaching specific target site goals and objectives. Site surveys are used to identify and locate potential site resources, such as power and water sources, which might be required for optimal site performance and maintenance needs. Site surveys help in the detection and prevention of unwanted wireless site interruptions, such as false alarms caused by wireless devices and poor or outdated wiring configurations.

With the advent of new technologies and wireless solutions, such as Wi-Fi hotspots and cell phones, locating a wireless site survey location has become a critical factor for site planning. In addition to improving service and managing costs, location-based services to improve customer service, attract new customers and enhance productivity. The results of a wireless site survey can provide a valuable reference point for prioritizing future wireless network improvements and service improvements. As part of site planning, it is important to consider and address potential wireless site interruptions, such as weak or deteriorated signal strength, improper wiring configurations and other issues that might affect the use and performance of a wireless network. More Info can be obtained on this site, read on here.

One of the considerations when determining a site plan involves analyzing whether a wireless site survey will provide enough coverage area or not. The minimum amount of coverage required for a wireless network is referred to as the Coverage Factor. The higher the coverage factor, the more efficient and effective the operation of the wireless network. The coverage distance of a wireless site survey typically ranges from one to three miles. More than three miles of coverage area requires additional analysis of the location, including possible improvements, such as floor plans.

One of the main reasons that location-based wireless site surveys are preferred over predictive survey methods is that location-based data provided by a predictive survey is based on point data. This means that points generated from the survey are at random, rather than being derived from a knowledge base of known access points to the network. By randomly generating points, this method ensures that coverage areas will not overlap and that the actual survey results will be more accurate.

As a result of this method, a majority of points generated during a wireless site survey will likely be invalid, because the server computing the data rates assumes that each point is valid. Therefore, valid, wireless site survey points cannot be derived using this method. The server then attempts to determine the probability of each point being valid by using a mathematical model. Once this information is extracted from the probability distribution, a standard deviation and confidence level is calculated to ensure that the data obtained is correct and reliable.

This type of wireless site survey is more accurate because it can provide up-to-date data rates for up to five hundred zones. Furthermore, this also provides enough information to determine wireless coverage densities within one hundred zones. All of these factors combine to make this a more reliable method of determining wireless coverage densities than any of the other methods used to determine wireless coverage densities. By using an accurate wireless survey approach, a wireless site survey can quickly determine accurate data rates in order to effectively manage wireless networks. Check out this post that has expounded on the topic: https://en.wikipedia.org/wiki/Surveying.