Wireless Site Survey Methods
The wireless indoor survey, also known as an RF site survey or wireless site survey, is the method of designing and planning a wireless site, to deliver the desired wireless service, optimum data rates, optimum network bandwidth, Best Practices, Roaming and Security, with the goal of reaching specific target site goals and objectives. Site surveys are used to identify and locate potential site resources, such as power and water sources, which might be required for optimal site performance and maintenance needs. Site surveys help in the detection and prevention of unwanted wireless site interruptions, such as false alarms caused by wireless devices and poor or outdated wiring configurations.
With the advent of new technologies and wireless solutions, such as Wi-Fi hotspots and cell phones, locating a wireless site survey location has become a critical factor for site planning. In addition to improving service and managing costs, location-based services to improve customer service, attract new customers and enhance productivity. The results of a wireless site survey can provide a valuable reference point for prioritizing future wireless network improvements and service improvements. As part of site planning, it is important to consider and address potential wireless site interruptions, such as weak or deteriorated signal strength, improper wiring configurations and other issues that might affect the use and performance of a wireless network. More Info can be obtained on this site, read on here.
One of the considerations when determining a site plan involves analyzing whether a wireless site survey will provide enough coverage area or not. The minimum amount of coverage required for a wireless network is referred to as the Coverage Factor. The higher the coverage factor, the more efficient and effective the operation of the wireless network. The coverage distance of a wireless site survey typically ranges from one to three miles. More than three miles of coverage area requires additional analysis of the location, including possible improvements, such as floor plans.
One of the main reasons that location-based wireless site surveys are preferred over predictive survey methods is that location-based data provided by a predictive survey is based on point data. This means that points generated from the survey are at random, rather than being derived from a knowledge base of known access points to the network. By randomly generating points, this method ensures that coverage areas will not overlap and that the actual survey results will be more accurate.
As a result of this method, a majority of points generated during a wireless site survey will likely be invalid, because the server computing the data rates assumes that each point is valid. Therefore, valid, wireless site survey points cannot be derived using this method. The server then attempts to determine the probability of each point being valid by using a mathematical model. Once this information is extracted from the probability distribution, a standard deviation and confidence level is calculated to ensure that the data obtained is correct and reliable.
This type of wireless site survey is more accurate because it can provide up-to-date data rates for up to five hundred zones. Furthermore, this also provides enough information to determine wireless coverage densities within one hundred zones. All of these factors combine to make this a more reliable method of determining wireless coverage densities than any of the other methods used to determine wireless coverage densities. By using an accurate wireless survey approach, a wireless site survey can quickly determine accurate data rates in order to effectively manage wireless networks. Check out this post that has expounded on the topic: https://en.wikipedia.org/wiki/Surveying.
